Automatic pool cleaners are an integral component of pool maintenance. Disaster strikes and also time concerns a standstill if your pool cleaner falls short. No matter if you have a suction, press or robot pool cleaner, at one allude you will have actually pool cleaner troubles such as those questioned listed below.

Tbelow are 3 main types of pool cleaners: suction, push and robotic. Suction cleaners connect into a suction line choose the wall skimmer, or a dedicated cleaner line that is sucking water right into the filter pump. Prescertain cleaners run on the push side of the filter pump — that is, they are powered by water being pushed to the cleaner, generally by a sepaprice booster pump. Robotic cleaners are independent of the filter pump; they operate under their very own power and don’t count on the suction or press of your filter pump.

You are watching: Why is my pool vacuum not working

This jiyuushikan.org article on the peak pool cleaner difficulties covers all 3 automatic pool cleaner kinds.


Suction Pool Cleaner Does Not Move

Suction pool cleaners are powered by your pump water flow when the pump is operating; they cover the totality pool in a random pattern but only while the pool circulation system is on.

To deal with a suction pool cleaner that is not working, the first step is to check the cleaner hose to make sure it is firmly attached to the suction line in the skimmer or to the dedicated cleaner line if your pool is equipped through one.

The second action is to check the hose sections to make sure tright here are no air leaks, either where the hose sections sign up with together or from splits or holes in the hose.

You may need to cshed down or restrict other suction lines, such as the major drainpipe or an additional skimmer, to rise the suction on the line the cleaner is linked into.

Problems to check for:

For low suction pressure, boost attract by cshedding drainpipe and also various other suction lines.Dirty pump basket or skimmer basket, or inline strainer basket.Cleaner stuck onto high spot in the pool floor.Cleaner stuck onto floor drains or pop-up in-floor cleaner heads.Air leaks in cleaner hose, or on pipes in front of filter pump.Clog in the cleaner head or hose; check for obstruction.Low or high pool filter push gauge readings, indicating circulation difficulties.Bad connection to skimmer, not making a tight seal of hose to skimmer.Problems through automatic bypass valve or skimmer connection gadgets.Failed or stuck diaphragm or flapper in the cleaner head.

Suction Pool Cleaner Is Slow

Typically the main factor for this kind of dysattribute is a congested pool filter or a clog at the intake hole at the bottom of your pool cleaner. To clean the intake hole, simply flip the cleaner over underwater and also look down right into the intake hole. You will certainly likewise want to make certain tbelow are no obstructions in the hose and that all hose relationships are tight and also secure.

The next action is to clean your skimmer basket, pump basket, and also pool filter. If there are leaves or rocks trapped in tright here, it will reduce your pump’s water circulation, which in turn will slow-moving down a suction pool cleaner.

When a suction cleaner is slow-moving or slow, it’s typically a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be illustration in air, reducing water-circulation volume. A worn footpad or a worn seal deserve to also minimize cleaner speed and also reason it to stick to the pool floor. Finally, check that the suction valves are open to offer all suction push to the skimmer linked to the cleaner.

Suction Cleaner Is Too Fast

Suction pool cleaners occupational based on your pool pump water flow. If you have a specifically effective pool pump or your water flow is exceptionally fast, your pool cleaners may relocate faster than usual. This have the right to cause your cleaner to skip over some debris as it “flies” around the pool.

Many suction cleaners have a device in the skimmer that will certainly permit you to manage the circulation, or if you have actually other incoming suction lines such as a primary drain or secondary skimmer. Opening these lines even more fully will certainly minimize the circulation from the line that the cleaner is connected to.

Suction Cleaner Does Not Cover Entire Pool

The solution to this concern may be as simple as checking the hose size. In order for the pool cleaner to be able to reach all areas of your pool, the hose need to be lengthy enough to reach from the skimmer or dedicated suction line to the farthest point in the pool through 3 feet to spare. If the suction hose is not long enough, take into consideration including extra lengths of hose.

Adjustments to the direction of the rerevolve jets in your pool have the right to impact cleaner coverage. Your returning water may be pushing your cleaner away from specific areas.

If the hose length or return circulation is not the problem, consult your owner’s manual for slight adjustments to the hose or cleaner, which will certainly produce a various cleaning pattern.

Air Bubbles Enter Pool at Rerevolve Line

This trouble might be led to by air leaks in the hose or the relationships. If the vacuum relationships are not fitted together tightly or the hose is punctured, air will certainly leak right into the system, bring about bubbles to appear at the rerevolve wall fitting.

Check the hose and also vacuum relations for any type of air leaks; the vacuum relationships can be tightened and secured via O-rings and hose leaks have the right to be easily addressed through silicone or rubber cement (which looks much better than duct tape!).

Suction Cleaner Gets Stuck on Steps/Ladders

Most suction cleaners have a device that breaks onto the throat of the cleaner to store it from gaining stuck on procedures. This is an aftermarket item for some cleaners.

If your cleaner is acquiring stuck on or under your pool ladder, you may consider installing a Ladder Guard Kit. If it sticks on a elevated primary drain cover, look at the UniCover, which creates a smooth shift from floor to drain.

You deserve to additionally make adjustments to the hose floats or hose weights (depending on model), to adjust the cleaning pattern. As a last rekind, placing a little boulder of the best size in the location or shortening the pool cleaner hose deserve to aid.

If your pool cleaner gets stuck on the primary drain cover because it’s elevated over the floor, Polaris renders a product referred to as the Unibridge to save your cleaner from obtaining stuck on increased floor fittings. 

For suction cleaners that get stuck on convex or concave spots on the pool floor, reducing the rate of the cleaner have the right to aid. For gunite pools, an extra drastic technique would be to shave actually off the plaster or fill in through more plaster in that location to make it smooth.

Visit our pool cleaner parts department for any kind of spares you need, or for even more ideregarding save your pool cleaner from gaining stuck. This article on poolcleanerhub may assist.


Pressure Pool Cleaner Does Not Move

Pressure pool cleaners should have around 30 PSI to run (17 PSI for low-press cleaners prefer the Polaris 360 or Letro Legend II). Check that the booster pump is operating and the filter pump must likewise be running at the same time.

Prescertain cleaners have actually an in-line strainer (some have two) that needs to be cleaned periodically. This may be located in the wall fitting link or in the feed hose.

Rocks or sand also deserve to become lodged in the wheels of a push cleaner, staying clear of motion. Likewise, tiny grains of sand or plaster can make their way about in-line strainers (particularly if you’ve lost yours!) and have the right to clog up small orifices inside the cleaner.

Prescertain cleaners might be shaft propelled, belt pushed or chain moved. Either among these power trains have the right to have difficulties. Generally speaking, these are functioning well if you rotate one wheel and the other wheels rotate at the same time and rate.

Pressure Pool Cleaner Is Slow

Check the in-line strainer(s) for debris that is slowing down the water circulation to the cleaner. Also check the hose, to make certain that pressure is not being shed somewright here alengthy the line. Slight water loss around the hose swivels is normal.

Loose wheels or loose drive belts have the right to reason your cleaner to behave actually sluggishly. Worn tires will alleviate speed and wall climbing capacity. Damaged or missing wheel bearings deserve to reason slow-moving activity. Check your owner’s hands-on for certain adjustments for your certain push pool cleaner.

Prescertain cleaners are powered by water, so when they are slow, or relocating slowly, the problem is generally flow connected. Check the filter display screens, located at the wall attachment, and in the hose on some newer models. If a booster pump is being supplied, be certain that both filter pump and also booster pump are operating and also aren’t leaking or making funny noises.

With the booster pump running, kneel dvery own next to the pool and grab the pool cleaner hose, and also progressively pull the cleaner towards you, inspecting the hose for leaks as you pull it out of the water (some leakage at swivels is normal). When you reach the cleaner head, organize it just above water and check it for water moving through three areas: out the rear thrust jet, out the sweeper tail and also spraying up right into the debris bag. The thrust jet and sweeper tail need to shoot water 15-20 feet. Likewise, if you rerelocate the debris bag, water must spray upward 15-20 feet in the air. If the water is spraying effectively out all 3 exits, you likely execute not have actually a water push problem, but a problem via the drive belts slipping, a broken axle, or worn (rounded) tires — or something stuck in between the wheels and also the cleaner body.

Pressure Cleaner Does Not Cover Entire Pool

For this problem, all you should carry out is change the thrust jet, situated on the back center, wbelow the water sprays out. The default setting is 11 o’clock, but placing it at 1 o’clock will certainly offer the cleaner an oppowebsite cleaning pattern.

The feed hose of course should be lengthy enough to reach the farthest point from the wall connection, plus 3 feet. Make sure that the feed hose is floating; old-style hose floats deserve to end up being water logged and not keep the hose up on the surchallenge.

Slipping wheels have the right to cause a press cleaner to acquire stuck in the deep end and also not have actually the toughness to pull itself back up right into the shenable end. Check belt anxiety or axle adjustments on more recent models, or the front wheel “teeth” on older Polaris and also Letro models. Ray Vac models have the right to circle the deep end when the debris bag or screen is full.

Strong push from wall or floor retransforms deserve to push a cleaner ameans from certain areas. In such instances, redirecting the eyesphere fittings or nozzle can deal with the problem.

Pressure Cleaner Does Not Move

Possible causes of this difficulty are:

Booster pump is off, or filter pump is off.Booster pump has actually an air lock or failed shaft seal.Drive belts or wheel axles are damaged or loose.WMS (Water Management System) has actually dislinked or damaged hoses.Feed hose or sweeper tail has actually splits or holes.Pool toys or sticks have actually come to be wedged between wheels and also body.String or wire has actually obtained wrapped around the axle.Backup valve is malfunctioning, constantly releasing water.Inline strainers are clogged.Small bits of sand also or grit have worked themselves into the WMS, clogging tiny orifices.

Prescertain Cleaner Gets Stuck on Steps/Ladders

If your pressure cleaner gets stuck on the stairs attempt to change the thrust jet to create a brand-new cleaning pattern. If you cleaner gets wrapped roughly a handrail or stuck behind a ladder, install ladder guards to block the route around these rails.

If the cleaner is going behind ladders or handrails and also obtaining stuck, you deserve to use ladder guards, made by Polaris, Pentair and others. Several designs are supplied, the finest being the one made by the manufacturer of your pool cleaner. Anvarious other choice is to rerelocate the ladder, if it’s hardly ever provided, or shorten the cleaner hose just slightly for enattempt action handrails. Suction cleaners frequently have actually a big ladder guard, typically a large ring, that can be fitted about the cleaner.

For pool cleaners that acquire stuck in a edge of the pool or stuck up against a step, grinding away, attempt to readjust the direction or cleaning pattern of the cleaner, which deserve to be completed by thrust jet adjustments, hose float adjustments, or adding hose floats or hose weights.

As a last rekind, placing a little boulder of the appropriate dimension in the area or shortening the pool cleaner hose have the right to aid. Keep in mind that the majority of press pool cleaners have reverse mechanisms or backup valves to reverse the cleaner direction eincredibly few minutes and also proccasion stalled procedure. If equipped, examine that your backup valve is functioning.

Prescertain Cleaner Feed Hose Becomes Tangled

Meacertain the hose to ensure that it is readjusted to the appropriate size for the pool size — as well much hose will certainly reason tangling. You likewise must make certain that the feed hose is floating. Waterlogged hose floats need to be reput. The hose swivels must revolve freely. Another opportunity is that not all wheels are being powered. Rotate among the wheels as soon as the cleaner is in OFF mode and also make certain that all wheels revolve together.

Too a lot power to a press cleaner can reason it to fly roughly the pool and tangle itself. Bleed off excess push at the wall fitting. If the thrust jet is in a 9 or 3 o’clock position, this will certainly produce a circular pattern, which may reason tangling. Visit our pool cleaner parts department for every one of the components stated.

If your pool cleaner hose has actually been hanging on a hook all winter, or has been stored tightly coiled, it have the right to develop a memory that causes the hose to twist and also tangle. One solution is to stretch the hose out straight along the pool deck in the hot sunlight, utilizing weights if essential, to allow it to straighten. A last resort may be to rearea some hose sections.


Robotic Pool Cleaner Does Not Move

Robotic pool cleaners are electrical, and don’t rely on your pump’s suction or press to relocate approximately the pool. The floating power cord for your robotic pool cleaner should be firmly plugged into the power supply transformer, which is plugged right into an outlet. The power supply should have an indicator light reflecting that power is being got.

If power is being received to the power supply, but the cleaner is not moving, we need to map the trouble towards the cleaner. The trouble lies where the power dies. Many type of times, the power cord itself have the right to have a brief, where the wires have broken, inside the rubber casing. This generally occurs at a point near the cleaner, wright here the stress on the cord is the biggest. If you have actually a dog that goes after the robot, look for bite marks in the cord!

If the cord is undamaged, you deserve to test the resistance of the wire via a test meter (set on Ohms) to ensure that the cord wires are not an issue. At this point, you will certainly desire to check the drive motor itself, to make certain relationships are tight, and also utilizing your test meter, inspect that the power is getting to the motor. If it is, and the motor is not responding to the power, this might be signaling the require for a new drive motor.

Is the transprevious power indicator light on? Check that outlet breakers are on.Inspect cleaner power cord and also plug for damage from pets, or kinks, knots or cuts.Inspect power cord attachments on the pool cleaner, and also connection right into motor or terminal board.Inspect drive tracks, drive belts and pulleys for alignment, tightness and also wear.If drive belts were recently reput, be certain that they follow the correct pattern.Dirty inner filters or an imcorrectly attached bottom plate can speak a robot cleaner.Debris may be wrapped roughly the propeller or wheel assembly, such as hair, string or tiny sticks.

Robotic Pool Cleaner Is Slow

This is usually a difficulty of loose drive tracks, loose drive belts or missing little components that save stress and anxiety on the belts and also tracks. You may notification that it moves yet doesn’t climb the walls any type of more. This can indicate worn drive tracks or wheel tube brushes.

Because robotic cleaners are not hydraulically powered, slow-moving operation is less of a trouble. When it occurs, yet, the cause can be a complete debris bag or filter, or the drive tracks or wheels have actually come to be worn or rounded, or are loose or out of alignment. Check all the belts and pulleys for appropriate position and also stress, and the wheels for correct alignment and also movement.

Robotic Cleaner Gets Stuck

If your floor surchallenge is not so smooth, you might discover the cleaner gaining stuck on high spots. Some more recent models have actually adjustments that will certainly raise the cleaner slightly, but this might weaken its vacuuming capacity. Robot cleaners can likewise get stuck behind ladders and handrails, and like our various other pool cleaners above, you can resolve this problem through a product dubbed a Ladder Guard, or making use of the Unibridge as soon as “high-centered” on the primary drain.

More Troubleshooting

If whatever has failed and your pool cleaner is being stubborn and is refmaking use of to corun, it might be time to contact among our pool specialists/advisers that can aid through you additionally through troubleshooting or repair. Of course, our professionals deserve to also assist you pick a brand-new pool cleaner if you’d quite just start over.

Many of the moment, your pool cleaner just demands a couple of tweaks below or tright here, or some pool cleaner parts, and it’s off and running aacquire.


If your pool cleaner is relocating around the pool generally however is not picking up debris, the normal solution is to clear the clog in the suction throat, or empty the debris bag or basket. Suction cleaners also need a clean pool filter to both relocate and vacuum well.

If your pool cleaner is not cleaning the whole pool, yet leaving some locations untouched, tbelow is frequently an adjustment that deserve to be made to the cleaning pattern or cleaner rate. Increasing the pool cleaner rate is possible on press cleaners by cshedding the bleeder valve at the wall connection. For suction cleaners, closing various other valves while using the cleaner and also maintaining the basket clean deserve to enhance rate. If your pool cleaner appears slower than normal, look for the cause of the push loss (or suction loss).

Changing the pool cleaner pattern is achieved on push cleaners by adjusting the thrust jet on the rear of the cleaner. If collection at 11 o’clock, move it to 1 o’clock, or vice-versa, to readjust the rotation or direction of a lot of turns. For suction cleaners, adjusting the hose floats and hose weights have the right to adjust the cleaner pattern. Also, solid wall rerevolve jets deserve to push a cleaner ameans from specific areas, making use of 90-level hose adapters and also pointing them straight down is frequently essential in such situations. Finally, if your cleaner hose or power cable is not lengthy enough to reach all locations of the pool, include even more hose size to reach all areas, or relocate the robotic cleaner power supply to an extra main area.

See more: King Of The Hill S02E01 How To Fire A Rifle Without Really Trying


Just like above, once a pool cleaner does not climb the walls (and it supplied to execute it), tbelow is a difficulty via the cleaning pattern or cleaner rate. Making adjustments to the cleaner pattern as explained above might create various outcomes, enabling the cleaner to make a far better strategy to the wall. Adjusting the cleaner speed is another means to conquer difficulties climbing the pool walls. It takes a good deal of traction and suction to climb a pool wall without falling off. If it’s not climbing the walls favor it used to, it’s most likely likewise going slower. Be sure tbelow are no pressure leaks or suction leaks in the hose that connects to the cleaner and also that the hose is not obtaining in the means. Tangled pool cleaner hoses are commonly the outcome of waterlogged hose floats, not sufficient hose floats or incorrect placement of hose floats.

Pool cleaners need timely replacement of pool cleaner parts to run at their full potential and also proccasion even more catastrophic failure from developing. If your pool cleaner is past repair and it’s time for a new one, check out our selection of over 100 pool cleaners, in stock and also ready to ship!