X-Core - Station Repeats A common factor for a controller to repeat a cycle is as well many programmed begin times. Only one start time per active regime is compelled, a second start time will certainly cycle the regimen a second time. NOTE: In the Start Times dial place, the numbers 1-4 perform not recurrent stations. The numbers recurrent the routine begin times. Each routine have the right to begin as much as 4 times on the collection days to water. One begin time will certainly activate all stations sequentially in that regime. If you desire the stations to run one time in sequential order and then not repeat, set start times 2, 3, and also 4 to OFF. Multiple begin times in a program have the right to be offered for sepaprice morning, afternoon, or evening watering cycles. Example: Program A has four stations (1-4) assigned to it and also the routine has one start time at 5:30 AM. At 5:30 AM, terminal 1 will water, complied with by terminal 2, then terminal 3, and so on until all four stations have watered. Start times must appear as you see in the chart below: Start Times PROGRAM A PROGRAM B PROGRAM C 1 5:30AM OFF OFF 2 OFF OFF OFF 3 OFF OFF OFF 4 OFF OFF OFF Individual stations are assigned to a routine (A,b,C). Each routine calls for just one begin time to initiate a watering sequence of all the stations assigned to that regime. Start times are assigned to programs, not stations. The controller will certainly operate the stations in numerical order. When a station has completed its watering time, the controller will switch to the following terminal in that regimen instantly. Eliminating a Program Start Time Turn the dial to the START TIMES position. Push the or button till you reach 12:00 am (Midnight). From right here press the button as soon as to reach the OFF place. The OFF Position is between 11:45 pm and 12:00 am NOTE: If a routine has actually all four-begin times turned off, then that program is off. (All other routine details are maintained.) Since there are no start times, tright here will certainly be no watering through that regimen. This is a convenient way to speak watering on one regime just without turning the dial to the OFF place.

You are watching: Why does my sprinkler system run twice


A widespread reason for a controller to repeat a cycle is too many type of programmed start times. Only one begin time per energetic regimen is compelled, a second start time will cycle the regimen a second time.

NOTE: In the Start Times dial place, the numbers 1-4 perform not represent stations. The numbers recurrent the program begin times. Each program can begin as much as 4 times on the collection days to water. One begin time will certainly activate all stations sequentially in that regimen. If you want the stations to run one time in sequential order and then not repeat, collection begin times 2, 3, and 4 to OFF. Multiple begin times in a program can be supplied for sepaprice morning, afternoon, or evening watering cycles.

Example: Program A has 4 stations (1-4) assigned to it and also the regime has one morning start time at 5:30 AM and also an evening begin time at 7:00 PM. At 5:30 AM, terminal 1 will certainly water, followed by station 2, then terminal 3, and also so on till all 4 stations have watered. At 7:00 PM, the controller will water the exact same cycle a 2nd time. Start times have to show up as you view in the chart below:

Start TimesPROGRAM APROGRAM bPROGRAM C
15:30 AMOFFOFF
27:00 PMOFFOFF
3OFFOFFOFF
4OFFOFFOFF

Individual stations are assigned to a program (A,b,C). Each regime needs only one start time to initiate a watering sequence of all the stations assigned to that routine. Start times are assigned to programs, not stations. The controller will certainly operate the stations in numerical order. When a station has completed its watering time, the controller will certainly switch to the next terminal in that routine immediately.

See more: Why Is My Droid Turbo So Slow Charging, How To Make Your Droid Faster

 

 

 


FAQs, Troubleshooting, Video

Customer Type:


Eliminating a Program Start Time
Turn the dial to the START TIMES place. Push the 
*
 or  button till you reach 12:00 am (Midnight). From here push the  switch when to reach the OFF position. The OFF Position is between 11:45 pm and also 12:00 am

NOTE: If a regime has all four-begin times turned off, then that routine is off. (All various other regime details are kept.) Because there are no begin times, there will certainly be no watering through that regimen. This is a convenient way to stop watering on one regimen only without turning the dial to the OFF position.