How to open dell optiplex

Article Summary: This write-up offers information on rerelocating components from a OptiPlex 380 Desktop Chassis.

You watching: How to open dell optiplex

Table of Contents:
1.

System Cover Removal

1. Pre-Removal Instructions Before rerelocating the First Removal:
Throughout installation or removal of any kind of hardware constantly ensure all information is backed up properly Disattach any type of telephone, netoccupational, or USB cables from the computer Disattach the computer and all attached devices from their electric outlets 2. Establishing image.
*
3. Pull back the cover latch release.
*
4. Tilt the device cover from the peak exterior, and then rerelocate the it from the mechanism.
*
5. Complete.
*
Back to Top
2.

Optical Drive Removal

1. Pre-Removal Instructions Before rerelocating the Second Removal:
Throughout installation or removal of any type of hardware constantly encertain all information is backed up properly Disaffix any type of telephone, network, or USB cables from the computer Disconnect the computer system and all attached tools from their electric outlets 2. Establishing image.
*
3. Disconnect the optical drive information cable.
*
4. Disconnect the optical drive power cable.
*
5. Pull up on the drive-release latch, and then slide the drive towards the back of the device.
*
6. Lift up to remove the drive from the mechanism.
*
7. Complete.
*
Back to Top
3.

Hard Drive Removal

1. Pre-Removal Instructions Before removing the Third Removal: Throughout installation or removal of any type of hardware always ensure all data is backed up properly Disconnect any type of telephone, netoccupational, or USB cables from the computer Disconnect the computer system and also all attached tools from their electrical outlets 2. Establishing image.
*
3. Disaffix the tough drive data cable.

See more: Toshiba Thrive Hard Reset Toshiba Thrive 7, How To, Thrive Pin Code Or Password

*
4. Disconnect the difficult drive power cable.
*
5. Press in on the two blue securing tabs on each side of the drive, and also then slide the drive towards the ago of the device.
*
6. Lift the drive and remove it from the device.
*
7. Complete.
*
Back to Top
4.

Riser Cage Removal

1. Pre-Removal Instructions Before rerelocating the 4th Removal: During installation or removal of any hardware constantly encertain all data is backed up properly Disaffix any kind of telephone, netoccupational, or USB cables from the computer Disconnect the computer system and all attached devices from their electrical outlets 2. Starting image.
*
3. Disattach the PS/2 serial-port cable from the system board.
*
4. Pivot the riser cage manage to an upbest place.
*
5. Gently pull on the handle and also lift the riser cage up and away from the system.
*
6. Complete.
*
7. Rotate the card retention latch upward.
*
8. Gently pull the release lever amethod from the card until you release the securing tab from the dent in the card, and also then ease the card out of its connector.
*
9. Complete.

See more: My Acer Tablet Wont Turn On 'T Turn On, Just A Moment

*
Rerevolve to the OptiPlex 380 DT Teardown/Removal Index. Back to Top

Click the button listed below to Tweet feedearlier or research assistance on anything in the over short article.