Dell diagnostics iso

Hardware Diagnostic are embedded devices installed in the pre-OS of your server to inspect hardware is working fine. Summary:Hardware Diagnostic are embedded devices installed in the pre-OS of your server to inspect hardware is functioning fine.See much less Hardware Diagnostic are embedded devices set up in the pre-OS of your server to examine hardware is working fine.
This post mirrors exactly how to begin the Hardware Diagnostic on PowerEdge servers, which is a tool provided by for basic troubleshooting and maintenance.

Table of Materials

1. Introduction

Hardware Diagnostic are installed tools installed in the pre-OS of your server. They are provided by

You watching: Dell diagnostics iso

It is recommfinished that you run diagnostics making use of the Hardware Diagnostics energy, as component of a constant maintenance setup to validay that the attached hardware is functioning correctly. Diagnostics utility have actually a physical (as opposed to logical) watch of the attached hardware, it deserve to recognize hardware troubles that the operating system and other digital devices cannot determine. You can use the hardware diagnostics utility to validate the memory, I/O gadgets, CPU, physical disk drives, and various other peripherals. The procedure relies on your Server Generation, shortcuts and also screenshots are easily accessible listed below.

Find in-depth indevelopment in the User Manualof your PowerEdge Server:

Choose the corresponding system type and click it Now all available manuals are presented

Note: Need assist to specify the generation of your server? Please describe the article: How to identify the generation of my server.

2. PowerEdge Servers 12Gand also later

Press F10 at startup. In the left pane of Lifecycle Controller, click Hardware Diagnostics. In the appropriate pane, click Run Hardware Diagnostics. The diagnostics utility is introduced. Follow the instructions on the screen. When the tests are finish, results of the diagnostics tests screen on the display. (Figure 1 - in English only)
Figure 1: ePSA Diagnostics
Note: To close the Hardware Diagnostics page, rebegin the device.

3. PowerEdge Servers 11G

At startup, pressF10to enter intoLifeCycle Controller.

See more: Programdata Apple Installer Cache By Apple, Ok To Delete Installer Cache

Click onHardware Diagnostics. On the display, choose Run Diagsto test components (Figure2(English-only)) MPMemoryto run diagnostics on the memory modules (Figure2 (English-only)).

Figure 2: Running the Diags

3.1 Starting the installed Hardware Diagnostic tool

Note: The steps listed below define the latest variation of the Hardware Diagnostics embedded in the Unified Server Controller (USC) of 11G PowerEdge servers. Older versions might look different, however the options are equivalent.

If you made a decision toRun Diags, you will then should :

SelectExpush Testto quick test all components

SelectExtended Testto test all components intensively

Selectthe Custom Testto test single components

Figure 3: Test Options

Testing one device

Choose Custom Test

On the next page, you need to select the component you want to test. E.g., for testing a hard disk: (Figure4(English-only)).

Choose the drive you want to test

Choose the type of test you desire to percreate (e.g. Drive Self Test)

Choose your prefered Diagnostic Options

Recommended: Non-Interenergetic Tests Only Log output file pathname (to conserve the results) Continue on Faientice (to proccasion interrupts once failures are found)

Click Run Test to start the process

Figure 4:Testing a difficult drive

3.2 Memory Diagnostics

MpMemory enables you to check the state of your memory. If you made a decision the MPMemory alternative, you will must choose the form of test you desire to run : Expush or Custom. For a basic test, you can pick Expush.

See more: How To Use Icloud Generator V3.2.1, Icloud Generator V3 2

Figure 5: MpMemory. (English) For a tradition test, examine the appropriate test you want to pass.
Figure 6:Custom Test.(English)

The time it takes to run the test varies relying on the amount of memory installed in your server.

4. PowerEdge Servers 9G / 10G

Execute application on your workterminal. ClickContinue. Choose a folder wright here to extract files. ClickCreate a Bootable CD. Choose a folder where to save thediags.isofile. Boot server to CD/online media. Choose option#2 - DDGUI Graphics based diagnostics.

Don"t foracquire to take a note of the test outcomes.

Need even more help?
Find additional PowerEdge and PowerVaultarticles Watch Part Replacement Videos for Enterprise products

Visit and ask for support in ourCommunities


Create an digital supportRequest

Post Properties Affected Product

Servers, PowerEdge, Legacy Server Models, Precision 7920 Rack