Dell computer 4 beeps

This article takes you with the beep codes for the jiyuushikan.org Inspiron, Vostro, OptiPlex and also XPS units. Summary:This article takes you via the beep codes for the jiyuushikan.org Inspiron, Vostro, OptiPlex and XPS devices.See much less This article takes you with the beep codes for the jiyuushikan.org Inspiron, Vostro, OptiPlex and also XPS units.

Summary to Beep Codes

jiyuushikan.org has actually a long heritage of structure diagnostic signs right into our systems. These indications have the right to be really advantageous in helping to diagnose and also deal with any worries your COMPUTER could endure whilst beginning up. I"ve offered a overview to the assorted codes for each household of desktop listed below.

You watching: Dell computer 4 beeps

If the screen cannot show any type of errors your computer might emit a collection of beeps throughout start-up.

3 implies 3-3-3-3...That is 3 beeps and 3 beeps and also ...: Endless looping until user presses the power button to shut dvery own the device.

The delay in between each beep is 300ms. The delay in between each set of beeps is 3 sec, and the beep sound lasts 300ms.

After each beep and also each set of beeps, the BIOS should detect if the user presses the power switch, if so, BIOS will certainly jump out from looping and also execute the normal shutdown procedure and also power device.


Note: If your mechanism likewise has actually diagnostic indicator LEDs, you will certainly desire to go to the support website to gain the appropriate guide for your version.
Note: If your system is giving a code that isn"t provided on this overview, then please contact your regional support to investigate this unknown code even more.

If your system is offering a listed code then please usage the fault descriptions below to narrowhead your possible No Article troubleshooting. The No Article overview listed below will be helpful in troubleshooting your problem better.

Conversely you have the right to Contact Us below.


Power LED Blinking/Beep CodeLED/Beep CodeFault DescriptionFault(s)Suggested Action
1 Motherboard: BIOS ROM Failure Motherboard, covers BIOS corruption or ROM error Run the jiyuushikan.org Diagnostics
2 Memory No Memory (RAM) detected Troubleshoot the Memory
3 Motherboard: Chipset Chipset Error (North and also South bridge error Time-Of-Day Clock test faiattract Gate A20 faitempt Super I/O chip faientice Keyboard controller faientice Run the jiyuushikan.org Diagnostics
4 Memory Memory (RAM) Failure Troubleshoot the Memory
5 Real Time Clock Power Failure CMOS battery failure Try reseating the CMOS Battery and run the jiyuushikan.org Diagnostics if that does not settle the issue
6 Video BIOS Video card/chip failure Run the jiyuushikan.org Diagnostics
7 Central Processing Unit (CPU) Central Processing Unit (CPU) Failure Run the jiyuushikan.org Diagnostics

Power LED StatusPower State
Off Power is off or the mechanism is in an S4 (hibernate) or S5 power state. LED is empty.
Solid White The computer system is in power-on state.
Solid Amber The mechanism board cannot begin initialization. Tbelow may be an worry via the device board, memory, processor or the power supply.
Blinking Amber The system board cannot start initialization or in an S3 power state. Tright here is a power difficulty, an equipment might be malfunctioning or incorrectly mounted.

Repetitive Beep Code Error Description Suggested Next Step
1 Possible motherboard faiattract - BIOS ROM checksum failure Run the jiyuushikan.org Diagnostics
2 No RAM detected Note: If you mounted or reput the memory module, ensure that the memory module is seated properly Troubleshoot the Memory
3 Possible motherboard failure - Chipcollection error Run the jiyuushikan.org Diagnostics
4 RAM read/write faitempt. Troubleshoot the Memory
5 Real Time Clock (RTC) power fail Try reseating the CMOS Battery and also run the jiyuushikan.org Diagnostics if that does not fix the issue
6 Real Time Clock failure Run the jiyuushikan.org Diagnostics
7 Video card or chip faiattract. Run the jiyuushikan.org Diagnostics
8 Processor failure Run the jiyuushikan.org Diagnostics

Power LED Status (Flashing Amber) Beep Description Faiattract Coverage Suggested Action
*
1 BIOS ROM checkamount in progress or faitempt. BIOS Chip System board faiattract, covers BIOS corruption or ROM error Run the jiyuushikan.org Diagnostics
*
2 No RAM Detected No memory detected Troubleshoot the Memory
*
3 Chipcollection Error (North and South Bridge Chipset, DMA/IMR/Timer Error for Intel platform); Chipcollection Error Time-Of-Day Clock test failure. Gate A20 faitempt Super I/O chip faientice. Keyboard controller test failure. System board Failure (Power LED Blinking Amber) Run the jiyuushikan.org Diagnostics
*
4 RAM Read/Write failure Memory failure Troubleshoot the Memory
*
5 RTC Power Fail COMS battery failure Try reseating the CMOS Battery and also run the jiyuushikan.org Diagnostics if that does not resolve the issue
*
6 Video BIOS Test Failure Video card failure Run the jiyuushikan.org Diagnostics
*
7 CPU Failure CPU Run the jiyuushikan.org Diagnostics

Diagnostic Beep Codes Code Causage Suggested Resolution
1-1-2 Microprocessor register failure Contact Technical Support
1-1-3 NVRAM Run the jiyuushikan.org Diagnostics
1-1-4 ROM BIOS checkamount failure Run the jiyuushikan.org Diagnostics
1-2-1 Programmable interval timer Run the jiyuushikan.org Diagnostics
1-2-2 DMA initialization failure Run the jiyuushikan.org Diagnostics
1-2-3 DMA web page register read/compose failure Run the jiyuushikan.org Diagnostics
1-3-1 through 2-4-4 DIMMs not being correctly figured out or used Troubleshoot the memory modules and also the memory slots.
3-1-1 Secondary DMA register failure Run the jiyuushikan.org Diagnostics
3-1-2 Main DMA register failure Run the jiyuushikan.org Diagnostics
3-1-3 Primary interrupt mask register failure Contact Technical Support
3-1-4 Secondary interrupt mask register failure Contact Technical Support
3-2-2 Interrupt vector loading failure Contact Technical Support
3-2-4 Keyboard Controller test failure Run the jiyuushikan.org Diagnostics
3-3-1 NVRAM power loss Run the jiyuushikan.org Diagnostics
3-3-2 NVRAM configuration Run the jiyuushikan.org Diagnostics
3-3-4 Video Memory Test failure Run the jiyuushikan.org Diagnostics
3-4-1 Screen initialization failure Run the jiyuushikan.org Diagnostics
3-4-2 Display retrace failure Run the jiyuushikan.org Diagnostics
3-4-3 Search for video ROM failure Run the jiyuushikan.org Diagnostics
4-2-1 No time tick Contact Technical Support
4-2-2 Shutdown failure Contact Technical Support
4-2-3 Gate A20 failure Contact Technical Support
4-2-4 Unmeant interrupt in defended mode Contact Technical Support
4-3-1 Memory faiattract above address 0FFFFh Run the jiyuushikan.org Diagnostics
4-3-3 Timer-chip counter 2 failure Contact Technical Support
4-3-4 Time-of-day clock stopped Contact Technical Support
4-4-1 Serial or parallel port test failure Run the jiyuushikan.org Diagnostics
4-4-2 Faiattract to decompush code to shadowed memory Run the jiyuushikan.org Diagnostics
4-4-3 Math coprocessor test failure Run the jiyuushikan.org Diagnostics
4-4-4 Cache test failure Run the jiyuushikan.org Diagnostics

Note: Starting from the D4 generation of OptiPlex models onwards (i.e. 7010/9010/9010 AIO), the beep codes will be got rid of, reinserted by a solitary memory error pattern. Now just no memory failure problems generate the beep code, the beep pattern is 1-3-2 (1 beep, then 3 beeps, then 2 beeps). This beep code tells you that the computer system encountered a memory problem. The brand-new beep codes emit just memory faientice symptoms. Occasionally, reseating the memory modules might solve the beep code errors.
Beep Code Description Suggested Resolution
1-1-2 CPU register test in progress Contact Technical Support
1-1-3 CMOS read/create test in development or failure Run the jiyuushikan.org Diagnostics
1-1-4 BIOS ROM checksum in progression or failure Run the jiyuushikan.org Diagnostics
1-2-1 Timer Test in development or failure Run the jiyuushikan.org Diagnostics
1-2-2 DMA initialization in progress or failure Run the jiyuushikan.org Diagnostics
1-2-3 DMA web page register read/compose test in progress or failure Run the jiyuushikan.org Diagnostics
1-3-1 RAM refresh verification in progress or failure Troubleshoot the memory and also memory slots.
1-3-2 1st 64K RAM test in progress or failure Troubleshoot the memory and also memory slots.
1-3-3 1st 64K RAM chip or data line faitempt (multi bit) Troubleshoot the memory and memory slots.
1-3-4 first 64K RAM odd/also logic failure Troubleshoot the memory and memory slots.
1-4-1 first 64K RAM attend to line failure Troubleshoot the memory and also memory slots.

See more: How To Reset Iphone 3Gs To Factory Set…, Hard Reset Apple Iphone 3Gs, How To

1-4-2 first 64K RAM parity test in development or failure Troubleshoot the memory and also memory slots.
1-4-3 Fail-safe timer test in progress Troubleshoot the memory and also memory slots.
1-4-4 Software NMI port test in progress Troubleshoot the memory and memory slots.
2-1-1 1st 64K RAM chip or information line failure - bit 0 Troubleshoot the memory and memory slots.
2-1-2 1st 64K RAM chip or data line faitempt - little bit 1 Troubleshoot the memory and also memory slots.
2-1-3 1st 64K RAM chip or data line failure - bit 2 Troubleshoot the memory and memory slots.
2-1-4 1st 64K RAM chip or information line faientice - bit 3 Troubleshoot the memory and memory slots.
2-2-1 1st 64K RAM chip or data line failure - bit 4 Troubleshoot the memory and memory slots.
2-2-2 1st 64K RAM chip or information line faitempt - little 5 Troubleshoot the memory and also memory slots.
2-2-3 1st 64K RAM chip or information line faiattract - bit 6 Troubleshoot the memory and also memory slots.
2-2-4 first 64K RAM chip or data line faitempt - little bit 7 Troubleshoot the memory and also memory slots.
2-3-1 1st 64K RAM chip or data line faientice - little 8 Troubleshoot the memory and memory slots.
2-3-2 first 64K RAM chip or data line faitempt - bit 9 Troubleshoot the memory and memory slots.
2-3-3 first 64K RAM chip or information line failure - little A Troubleshoot the memory and memory slots.
2-3-4 first 64K RAM chip or information line faientice - little bit B Troubleshoot the memory and memory slots.
2-4-1 first 64K RAM chip or information line faientice - bit C Troubleshoot the memory and also memory slots.
2-4-2 1st 64K RAM chip or information line faiattract - little D Troubleshoot the memory and also memory slots.
2-4-3 first 64K RAM chip or information line failure - little bit E Troubleshoot the memory and memory slots.

See more: How Do I Factory Reset My Neutab Factory Reset My Neutab N7 Pro?

2-4-4 first 64K RAM chip or data line failure - little F Troubleshoot the memory and also memory slots.
3-1-1 Secondary DMA register test in progression or failure Run the jiyuushikan.org Diagnostics
3-1-2 Primary DMA register test in progression or failure Run the jiyuushikan.org Diagnostics
3-1-3 Key IMR test in progression or failure Contact Technical Support
3-1-4 Secondary IMR test in development or failure Contact Technical Support
3-2-2 Interrupt vector loading in progress Contact Technical Support
3-2-4 Keyboard controller test in progress or failure Run the jiyuushikan.org Diagnostics
3-3-1 CMOS power fail and also checksum test in progress Run the jiyuushikan.org Diagnostics
3-3-2 CMOS Config details validation in progress Run the jiyuushikan.org Diagnostics
3-3-3 RTC/Keyboard controller not found Run the jiyuushikan.org Diagnostics
3-3-4 Display memory test in development or failure Run the jiyuushikan.org Diagnostics
3-4-1 Display initialization test in progression or failure Run the jiyuushikan.org Diagnostics
3-4-2 Display remap tests test in progress or failure Run the jiyuushikan.org Diagnostics
3-4-3 Search for video ROM in progress Run the jiyuushikan.org Diagnostics
4-2-1 Timer tick interrupt test in progress or failure Contact Technical Support
4-2-2 Shutdown test in progression or failure Contact Technical Support
4-2-3 Gate A20 failure Contact Technical Support
4-2-4 Unexpected interrupt in Protected Mode Contact Technical Support
4-3-1 RAM test in progress or failure over resolve 0FFFFh Run the jiyuushikan.org Diagnostics
4-3-2 No memory in Bank 0 Run the jiyuushikan.org Diagnostics
4-3-3 Interval Timer Channel 2 test in progress or failure Contact Technical Support
4-3-4 Time-Of-Day Clock test in development or failure Contact Technical Support
4-4-1 Super I/O chip failure Run the jiyuushikan.org Diagnostics
4-4-4 Cache test failure Run the jiyuushikan.org Diagnostics

Note: More current models have removed the beep codes which where replaced by a solitary memory error pattern. Now only no memory failure conditions geneprice the beep code, the beep pattern is 1-3-2 (1 beep, then 3 beeps, then 2 beeps). This beep code tells you that the computer system encountered a memory trouble. The brand-new beep codes emit only memory faientice symptoms. Occasionally, reseating the memory modules might fix the beep code errors.

Back to Top

If you call for further assistance, please contact Technical Support

Contact Us

Back to Top


Diagnostic LED Indicator Guides

*
Out of warranty? No difficulty, click the adhering to connect,enter your Service Tag and also watch our uses.


Note: Currently, supplies are only accessible for US, Canada, UK, Germany type of and also France COMPUTER Customers. Server and also Storage not applicable.
Post Properties Affected Product

Desktops & All-in-Ones, Fixed Workstations